Measurements required for

AK (above knee) covers:

Important information

We kindly ask you not to include any special characters, including language-specific characters (ü, ł, ô), in the names of the sent files. Otherwise, all attached graphic files will not be processed.




Smart

Smart AK Wysokosc & Wyskosc wystajaca stopa.jpg

The height of the cover — must take into account the gap between the cover and the foot. Usually, it is 7 mm. The softer the foot (e.g. fibreglass), the greater the gap will be.

Smart

Light AK Circumference.jpg

Cover circumference — this is the circumference at the widest point of the cover. We recommend that you use a smaller cover circumference compared to the actual calf circumference. According to our and our clients' opinion, flex covers look good when their circumference does not exceed 40 cm.

Smart

Smart AK Knee joint.jpg

Smart
Smart-Catalog Number
MAX

Smart AK Wysokosc & Wyskosc wystajaca stopa.jpg

The height of the cover — must take into account the gap between the cover and the foot. Usually, it is 7 mm. The softer the foot (e.g. fibreglass), the greater the gap will be.

MAX

For. Proteza STOPA2.jpg

Please enter the external dimensions of the foot shell to make sure your cover aligns perfectly with the prosthetic foot.

MAX

Light AK Circumference.jpg

We recommend reducing the circumference of the FlexCover by a few percent, even more than 10 percent for a very large calf.

MAX

Pomiar obwodow2.jpg

Calf circumference at provided heights in cm

All colours are suitable for a tattoo except black.

MAX

Pozycja i kierunki Tattoo AK.jpg

MAX

Skan AK.jpg

MAX

4 photos AK.jpg

MAX

Stopa Wymiary Eng.jpg

In order for the cover to fit the foot, you must send us a photo with a visible foot shell. It is very important that the camera lens is perpendicular to the pyramid. The distance from the cover to the lens should be approximately 1 meter.

MAX

Poziom obiektywu aparatu Eng.jpg

We need to know the angle of the prosthesis to the foot. It is important that the camera lens is level with the top of the foot shell.